Creating Business Visibility!

Archive for the ‘banners and signs’ Category


A short video on how to set up your tear drop banner or feather banner pole. It can get a little confusing at times so here it is! When you first get your feather banner or tear drop banner the instructions are a little lacking. If you not careful you can you can put the poles together backwards and they won’t fit properly. This video will make it easy, or read our step by step instructions below. Either way if you still are having issues give us a call and we’ll walk you through the process. We also have a video on installing your tear drop or feather banner on our website here. Also video instructions on creating artwork for your feather flag.


When you first receive your feather banner or tear drop banner it will come in a case like this.

feather banner case

Feather banner case

Open the case you will see your feather flag or tear drop flag and the poles right next to it.

Feather flag or banner open case.

Feather flag or banner open case.

When you take the feather banner poles out you will see they go from larger to smaller.

Feather banner poles and stake.

Feather banner poles and stake.

Before you begin to assemble your pole understand that if you put 2 ends together that look finished that is wrong! They may fit together but that means that another portion of your pole won’t work.

Feather flag poles wrong ends together.

Feather flag poles wrong ends together.

You want to assemble a finished end with a non finished end to make your feather flag pole work properly.

Feather banner or tear drop banner poles correct ends.

Feather banner or tear drop banner poles correct ends.

Keep joining the proper pole ends together, when you run out of sections you are done!

Feather banner poles together.

Feather banner poles together.

How to get a sign permitted

I’ve been making signs since 1980 and I really enjoy the creativity of the sign business. The most challenging part of the process remains permitting a sign. Cities and suburbs have sign ordinances that restrict the size, location and sometimes the lighting and type of sign used. Landlords may also impose their own restrictions; these are likely to be the most stringent in a mall. The reality is most entrepreneurs need professional assistance with signage since they don’t have experience in this area. You probably won’t know how big the letters should be to be visible from down the block, what fonts are readable, color combinations that make it easy to read, and you may not know which materials fare best in inclement weather. For this reason it make sense to seek out a sign professionals help. Still want to do it yourself? Here is a video that explains it or you can read all the tips to help in the process following the video.

Do your homework!

Cities usually have all the sign criteria online. Look it up and find out what is allowed in your neighborhood. It will save you time and frustration. I have met with many owners who have designed a sign and I have to let them know that it can’t be done because it violates the sign code. 

Expect to spend an hour or more at the city!

Years ago, a permitting office would quickly approve your design. If it met the requirements, you were good to go. Today, properties face much heavier scrutiny. Many require review from the local architectural review board. Some need a stamped engineer’s drawing. Other county officials want to see the calculations used by the engineer to ensure they are accurate. You will need site plans showing where the sign will be placed, property lines, and dimensions. By the way, most cities do not like Google maps used for site plans. They require drawings. You will also need scaled drawings showing the sign, colors, attachment methods and if it’s an electric sign power connections.

Make friends with the planning and zoning people!

There is no other way of saying it, don’t be a jerk! Zoning rules are not always black and white; in the gray area are the relationships that you personally and professionally maintain with the individuals who are responsible for approving and rejecting signs. The folks that work at the city offices are working 8 hour days in a difficult environment. Be the “good guy” and things will move easier for you and them. Make sure you are the person they are glad to see.

Follow up and be persistent!

Be diligent and proactive. If they say call back in a week call back in 3 days. Be persistent and proactive but don’t be a jerk.

Ask a lot of questions.

Even if the ordinances seem crystal clear, ask lots of questions. The way they are written can be very confusing to understand and even the clerks at the city sometimes have trouble deciphering them. Most cities require a licensed sign contractor to even pull a sign permit or install a sign. So even as a business owner who is willing to put in the time to install a sign, you may not be able to obtain a city permit as an unlicensed sign contractor. Find that information out before you get too far in the process.

Let us help you!

If you’ve come to the conclusion that spending weeks learning codes and permits aren’t for you, then the next step is finding the right business sign professionals that will give you a full-service package and install a business sign you can be proud of. You’ll want a business that does more than just take your order, you’ll want a business that serves as an advisor, guides you through the process, and has open communication about any snags along the way. We are that sign contractor!

Think you’re ready to get that new business sign you’ve been dreaming of? Hopefully you’ve gained some helpful insight with the professional tips above. Good luck with the installation of your new business sign!

How to Change a Roll Up Banner Stand

Fixing a banner in a retractable banner stand is fairly simple. If you haven’t fixed a pull up banner before here are a few tips to make it easy. Roll up banners are a great way to advertise your product or service. They can be used for multiple specials by changing the banner, but sometimes the banner accidentally goes back into the banner stand. Don’t fret, fixing your roll up banner is easy when you know how to do it. In this video we show you how to fix your pull up banner stand. We also share step by step instructions to fix your pull up banner in the following paragraphs.


Remove the end caps of your roll up banner stand.

Roll Up Banner Stand.

Remove the end caps from your banner stand.

Remove the cover to your pull up banner.

Remove the cover to your pull up banner stand.

Tape leader to allow you to roll up tension core easier.

Tape leader to allow you to roll up tension core easier.

Wind up the core to load the spring tension.

Wind up the core to load the spring tension in your retractable banner stand.

When at tension install pin to hold core in place.

When at tension install pin to hold core in place.

Attach banner to the leader of your pull up banner stand.

Attach banner to the leader of your pull up banner stand.

Slowly let banner rewind into place.

Slowly let banner rewind into place.

Put end caps back on and your done!

Put end caps back on and your done!

Step and Repeat Banners

Cooper tested and approved! Step and repeat banners are a perfect way to make sure the logos of your sponsors get seen and noticed. We have them available from 24″ wide up to 60″ wide and 8′ tall.

Screen Shot 2019-06-24 at 9.40.38 AM

A step and repeat banner (sometimes a step and repeat wall or press wall) is a publicity backdrop used primarily for event photography, printed with repeating logos or emblems that are visible in photographs of the individuals standing in front of it.

Why are they called step and repeat? Because the same image is shown over and over in multiple places. Step and repeat backdrop banners provide opportunities for everyone to stand on the red carpet and capture photos with the special event emphasized.

The most popular size is either an 8×8 or an 8×10. They can be used indoors or outdoors. That being said they come in all sizes and can be as long as 20 to 50 feet.

The typical size of a logo should be anywhere between 9 inches to 11 inches wide. You could opt for reducing the size but it will not feature well in photographs. You want the logos to be large enough to be readable to give the companies that sponsored the event exposure.

8 Unbelievable Things You Never Knew About Signs

I’m often asked if a sign can really make a difference in sales for a store. The short answer, YES! Next I’m often asked about price, can I get it cheaper? Of course! But the truth is a lot more complex. The Sign Research Foundation has done a lot of tests and found some incredible truths that every business owner should understand. ROI is directly related to the quality, enjoyability to view, legibility, uniqueness, and informational aspects of a sign. The mistake most designers and customers make is looking at sign or building ROI in isolation of the entire customer experience. Revenue per square foot of space is 10 to 25% more for those business’ who deliver an integrated experience from sign to design throughout the store. So what does it all mean? Going cheap on signs may be less in the short term but its costing you money over the life of your business.

Heres an interesting case study to look at.

ROI comparisons

25 Years in the Making!

A huge thank you to you, all our clients, friends and vendors that helped us reach the milestone of 25 years in business. To celebrate we had a big open house with give aways, pictures and fun. A special “Thank you” to San Diego East County Chamber of Commerce and Business 2 Business for coming out and helping us celebrate!

25th anniversary

TBT Giant Balloon!

TBT, we did this 25′ tall Dannon cup around 1995. All hand painted before digital printing was even around! We would have to project and pattern it on a wall then transfer it to the fabric and paint it before was sewn together.


Tag Cloud